Natural stone front wall and pedestrian gate in Brighton

Natural stone walling and pedestrian gate installation in Brighton

Location Brighton
Completed November 2026
Service Natural stone walling and pedestrian gate installation
Scope Natural stone front wall and pedestrian gate

The job

A homeowner in Brighton had a brick front boundary wall with iron trellis between the piers, which they were never keen on. They already had Horsham stone walls in the back garden and wanted the same natural look at the front. They also wanted a separate pedestrian gate, so visitors would not always have to come in through the driveway.

What we did

There was enough space between the existing wall and the pavement to build a stone facing without demolishing the original structure, and the existing concrete foundations were substantial enough to carry it. So we recommended keeping the wall and tying the new sandstone facing to the brickwork. We removed the iron trellis, filled the openings between the piers with brickwork and cut back the pavement tarmac to expose the foundations. We then installed wall ties and built approximately 100m² of natural sandstone facing, selecting and shaping every stone by hand so the finished wall reads as traditional dry stone walling, with the mortar concealed behind the stone. We formed the new pedestrian entrance, installed the steel gate posts, adjusted the opening with brickwork and finished the stonework around the gate, the angled sections and the postbox. The top of the wall is finished in carefully cut natural stone rather than separate coping stones. Materials were locally quarried Horsham stone, an additional matching sandstone, brickwork, wall ties and a sand and cement mortar.

Challenges

The biggest challenge was selecting and shaping the stone. The quarry supplied a mix of sizes, and we needed enough longer stones to span several bricks for strength while avoiding continuous vertical joints. Horsham stone can shatter rather than break cleanly, so at times a grinder was needed instead of traditional stone-cutting hammers. Working alongside a public pavement meant keeping things safe and considerate for pedestrians, bringing all the stone and equipment in every evening and setting up again each morning. Towards the end of the project the quarry stopped producing the original stone, so a different sandstone had to be carefully blended into the existing work.

The result

The wall runs approximately 50 metres long and 2 metres high. Because of the selecting, cutting and shaping involved, progress was around 1m² of stonework per working day. The customers love the finished wall, which has transformed the front boundary and ties in with the stonework in their back garden, and the new pedestrian gate gives visitors their own entrance. We have had lovely comments from people walking past, and some stop to run their hands over the stonework. It is one of the natural stone walling jobs in Brighton we are proudest of.

Planning Natural Stone Walling or a Pedestrian Gate?

Call us on 07522 055993 for a free quote in Brighton and the surrounding areas.

Get a Free Quote